BarcodePop barcodes are complete barcodes with their check characters and quiet zones, so a barcode that does not scan almost always comes down to the scanner settings, the print or the size. Go through these in order.
1. Test on the screen first #
Scan the barcode straight from the screen at 100% zoom, or with a phone app that shows the type and the data. If that works, the barcode is fine and the problem is in the print (step 4). If a phone app reads it but your scanner does not, it is the scanner (steps 2 and 3).
2. Is the type enabled on the scanner? #
Many scanners ship with some types turned off, often Codabar, ITF-14, UPC-E, GS1-128 or the 2D types. Check the scanner’s manual for its setup barcodes and turn on the type you use. If your system expects a particular type, pick that type in BarcodePop instead of Auto.
- DataMatrix, GS1 DataMatrix and PDF417 need a 2D (imager) scanner. A laser scanner cannot read them.
- Code 39 with the check character: if your scanner expects the optional mod 43 check, turn on Code 39 check digit in Settings; if it does not, turn it off.
3. The scanner reads, but the wrong value appears #
- Letters in the wrong case or swapped characters (Y and Z, for example) point to a keyboard layout mismatch between the scanner and the computer. Set the scanner to the keyboard layout of your computer.
- A UPC-A that shows 13 digits with a leading 0 is a scanner setting (UPC-A as EAN-13). Both mean the same product.
- GS1-128 data without the separators between fields: turn on FNC1 or GS1 output in the scanner settings.
4. Check the print #
- Print at 100%, with no Fit to page. See Print barcodes from Excel.
- Make sure nothing touches the white margin around the bars: cell borders, text, a fill colour or another picture.
- Do not resize the pictures by dragging. Pick another size and create the set again.
- Faint or smudged bars: use a laser printer if you can, turn off toner-saving and draft modes.
5. Try a larger size #
Older scanners and scanning from a distance need wider bars. Switch the set to Large (remove the set and create it again with Large). Very long Code 128 values give wide barcodes; a shorter value or a 2D type helps there.
Still no luck #
Contact support with the type, the size, the value, your scanner model and a photo of the printed barcode.
